QED SIGNATURE REVELATION - 50M

‘Revelation’ speaker cable lives up to its name and delivers unprecedented sonic performance at a price comfortably affordable by all Hi-Fi and home cinema enthusiasts. this cable is a miniaturized version of our flagship ‘genesis’ cable and features Teflon dielectrics to maintain its low impedance

More details

More info
Comments

FEATURES AND BENEFITS

AIRCORE™ TECHNOLOGY

QED cables above 2.5mm2 cross sectional area utilize air core technology to obviate the skin effect by bundling several separately insulated smaller cores together to make up a larger CSA. If these conductors are arranged around a hollow central core of polyethylene the self inductance exhibited by the cable can be reduced to around that predicted by calculation

TEN SILVER PLATED 99.999% OXYGEN FREE COPPER CENTRAL CONDUCTORS OF 19/0.1MM

Deliver incredibly low resistance and detail

FEATURES TEFLON DIELECTRICS TO MAINTAIN ITS LOW IMPEDANCE

Low constant dielectric materials such as Teflon have been to cut down on the amount of audio signal energy lost due to cable capacitance

SPECIFICATIONS

Jacket OD - 5.00mm

Cross-sectional area - 1.50mm²

Loop resistance - 20m ohm/m

Capacitance - 35pF/m

Inductance - 0.52 uH/m

Dissipation factor - 0.0009

Recommended for high end bookshelf installations

Lifetime Guarantee

CABLES MATTER

Signature Revelation a miniaturized version of our flagship ‘Genesis’ cable

The results from our prestigious 'Genesis Report' led to the design of this extraordinary speaker cable.

Revelation utilising the same Aircore Technology™ seen in the Genesis speaker cable.

Calculation can accurately predict the maximum

skin depth at a given frequency for a particular

conducting material making it possible to keep

the diameter of the cables below the critical size

determined by the maximum frequency expected.

QED cables above 2.5mm2 cross-sectional area

utilize air core technology to obviate the skin

effect by bundling several separately insulated

smaller cores together to make up a larger CSA.

If these conductors are arranged around a hollow

central core of polyethylene the self inductance

exhibited by the cable can be reduced to around

half that predicted by calculation.

Thus a useful linear lowering of impedance across the whole audio spectrum can be achieved using the aircore geometry when compared to a traditional large CSA twin core cable.

Aircore Technology™ is completely effective in pushing the onset of the skin effect outside of the audio band for cables of large cross –sectional area. Because great sonic benefits are gained from a large CSA it is essential that the skin effect is dealt with to avoid unwanted non –linearity in the cable’s frequency response. Because Aircore Technology also reduces the self-inductance of the cable to around half that expected of parallel conductor geometry by calculation, spacing can be increased to reduce capacitance without the extra inductance generated by this change causing audible problems in the cable performance. The use of quality dielectrics coupled with low capacitance means that the rate of energy loss in the cable (its dissipation factor) is extremely low at 0.0009